Monday, September 12, 2011

Gone Fishin’ Themed Cake


We celebrated my dad’s birthday this past weekend. Fishing has long been a hobby of his. I wanted to make a fun cake in a theme he would enjoy. 

You will need: 

  • A cake 
  • Icing (blue and brown)
  • A large marshmallow 
  • Gum drops (red and green) 
  • Gummy ribbons 
  • Sugar art eyes 
  • Pirouline creme filled wafer 
  • Chocolate covered nuts

Cut a “V” in the flat end of the large marshmallow. Then cut off one of the corners on the other flat end. 

Separate the colors of the candy ribbon into strips. Or you can use something similar like a Twisler. 

Flatten the gum drops. Shape the red gum drops to fit the mouth portion and smash the green gum drops until they achieve some translucence. You can always choose to make your fish a color other than green. 

Create scalloped strips from the green gum drops. If the gum drops do not stick to the marshmallows dab a few drops of water to the marshmallows and backs of the gum drop strips. 

Do not forget to place the eyes on the sides of the marshmallow and use a piece of pink sour strip to outline the mouth. I had a bag of these pre-made eyes on hand. If you do not have pre-made eyes, before dying your icing, set aside a spoonful of icing for the eyes. Place your two white icing dots on either side of the marshmallow and color the icing before placing a second inner dot. 

I dipped almonds in chocolate because the cake was a chocolate almond cake. You could use store bought chocolate almonds or dip any type of nut you like in chocolate to create the rocks around the edges of the cake pond. 

Use a long piece of the sour strip and a creme filled wafer to create the end of the fishing poll and line. And Voila!

Friday, September 9, 2011

Creamy Turkey and Pork Roll-ups


Ok. So I admit the idea for this recipe came from Mr. Food on the noon-time news. But, as always, I have put a spin on the original basic, simple entree, and made a tastier, less simple version. I think this is a great combination dish as we wind down summer and segway into autumn’s heavier meals. 

This can be served with sides as a meal or in mini versions as hors d'oeuvres. You can easily control the portions with your meat selections, also. 

You will need: 
  • 6 oz. pork chops or pork loin cut into 4 thin slices 
  • 1 coarsely chopped or sliced roasted red pepper 
  • 1 coarsely chopped or sliced roasted green pepper 
  • 4 oz. low fat cream cheese 
  • 1/8 c. basil pesto 
  • 4 (or 8) slices of smoked turkey 
  • 1/4 c. shredded parmesan cheese 
  • 3/4 c. crumbled light cheese flavored potato chips 
  • fresh basil, garlic, rosemary and thyme (optional) 

Toss in olive oil and place coarsely chopped or sliced roasted red and green pepper on a non-stick baking sheet. Sprinkle a handful of finely chopped fresh basil, garlic, rosemary and thyme over the peppers. Roast in the oven at 400 degrees F. 

While the peppers are roasting remove your cream cheese from the refrigerator. Place the cream cheese in a small-medium mixing bowl to soften. 

Remove the roasted peppers and herbs from the oven. You can sauté the peppers and herbs in a skillet if preferred. Stir the basil pesto into your cream cheese, then add all the contents from the baking sheet into bowl. Mix to the point of coating the peppers. 

Spread your cream cheese and pepper mixture down the center of one side of each piece of turkey and pork. 

Layer the pork onto the turkey. You should have from bottom to top: turkey, pepper mix, pork, pepper mix. Sprinkle the parmesan cheese evenly over the top layer of the cream cheese and pepper mixture. 

Now let’s roll! If your turkey slices are wide enough you can tuck in the edges. If your turkey slices are not long enough add a second slice. Secure your turkey/pork roll with a couple wooden toothpicks each. 

Place your crumbled potato chips (or Italian bread crumbs) in a bowl. Dip each meat roll into the bowl lightly coating the turkey slices. 

Bake on a cookie sheet for about 45 minutes at 350 degrees F, or follow the baking directions on the pork, since it is the only raw portion. 

Voila! Entree or hors d’oeuvre.

Monday, September 5, 2011

Wine Glass Lanterns


Happy Labor Day! I hope each of you are enjoying a relaxing day off. If you are so inclined to take pleasure in creating an intimate candle-lit dinner for someone special tonight or anytime, really, this is a fantastic centerpiece idea created from items you probably have around the house. 

I actually intended to do something with up-right wine glasses and tea-light candles, but what materialized was a more elegant twist on the original plan. The other night I set up this center piece to test and photograph it. I was a bit shocked at how pretty the finished piece was. This centerpiece would even function for evening wedding receptions and nice dinner events, especially if you are aiming for sophistication, but on a tight budget. An excellent feature to the piece is it’s versatility. This idea can be replicated with just about any type of translucent glass stemware and any type of vines and florals. You could even try this with interesting glass bowls and change the foliage for a seasonal look. 

You will need: 
  • 3 Wine glasses - in a variety of heights 
  • 3 Battery operated tea-light candles 
  • Vine clipping 
  • Floral arrangement in floral frog (see previous post) 
  • Double sided tape, fashion tape, or hairpiece tape 

First please review the previous post over creating a small floral arrangement from a DIY floral frog. 

I love this hairpiece tape! Basically, it is the same thing as women’s “fashion” tape. It is double sided, holds well, and easy to remove. 

Place a piece of tape on the underneath side of your tallest wineglass’ base. I only needed a half piece of the hairpiece tape. 

Position a battery operated tea-light candle under each inverted wine glass. Arrange the glasses in a triangular formation. Stair-step the glasses with the tallest glass in the back. 

Bring out your floral arrangement...the one you arranged with a floral frog. If you do not have any way of arranging flowers in a frog you could still make this work...instructions as follows: tape your cut end of your vine clipping to the underneath side of your tallest wineglass’ base. (Note* You want to use about a 1’ + vine clipping either way you choose to construct this centerpiece.) Wrap a small amount of floral wire around the vine near the tape. Twist the wire, securing it to the vine, while leaving the two wire ends sticking straight up. Remove the stems from any flowers you use. Slide one or more flowers onto the wire ends. Arrange the flowers to nearly flush with the vine and absolutely covering the tape. 

Position your vine on one of the frog’s spikes. My vine was too heavy. I actually had to lay the stem of the vine perpendicular to three spikes and push it down into all of them. Allow the vine to trail from the back and side of your arrangement, but see to it that other foliage drapes over the points the vine is held in place. Secure the bottom side of your floral frog to the tallest wine glass’ base where you have placed your double sided tape. Permit the vine to wonder over, around and through the glasses’ bases and stems. 

Voila! Turn out the lights and marvel at your romantic creation.

Friday, September 2, 2011

DIY Floral Frog for Flower Arrangements


The other day I was actually planning the post to follow this post when it occurred to me that I needed a floral frog. My husband has dropped several verbal reminders lately about frivolous spending. Knowing that this little plastic object would run me around $5 (or more) and a trip to the craft store (where I could easily become distracted), and then not knowing how much I would use it, my mind manage to mesh together a similar image from everyday household objects. 

You may be wondering, “What is a floral frog?” It is a helpful tool in flower arranging. It often has a similar purpose to floral foam, as far as positioning a particular stem in place, but it is smaller, less messy and plastic or metal. You can situate the flowers as you would like for them to remain and either place them in a vase, something very shallow - like a decorative plate, or do without a container all together. Here is an example of a floral frog you may find in a craft store. 


You will need: 
  • Hot glue gun and glue 
  • Milk lid 
  • Thumb tacks 
  • Flowers and/or greenery 
Place your milk lid (use a larger lid, about 1.5” diameter) upside-down on a flat surface. Squeeze drops of hot glue into the lid. 

One at a time, place (flat top) thumb tacks into wet hot glue. Repeat, drop of hot glue then thumb tack until you have filled the lid. Allow your DIY frog to dry for a few minutes. 

While you are waiting for your frog to dry harvest some flowers from your garden or trim purchased stems. 

I have found that cutting flat, not diagonal as you typically would, just below a joint on the stem allows for a wider, more sturdy base. 

When your frog has cooled and the thumbtacks are no longer mobile slide your cut stems onto the thumb tacks to create a small versatile arrangement. 

I am not a professional florist by any means, but a few pointers I have collected from design school and a limited variety of floral classes are the importance of creating a focal points, choosing complimentary colors and textures, introducing levels, and developing repetition. These are simply flowers from my own garden and even one pretty weed. As you can see, a few drops of water into the milk lid and no vase required. 

Voila! A free-standing, practically no cost, DIY floral arrangement!

Monday, August 29, 2011

Give a soiled garment new life.


Have you ever ruined your favorite dress? Let me encourage you to get tough and reclaim your clothes from a disastrous stains. 

I made this little dress to wear to “business casual” events. I have bit of a problem with the term “business casual.” Regarding my business, casual would be somewhere in the realm of pajamas to workout clothes because my work days consist of studio/art-design time, volunteer projects, and gym workouts. This does not mean I do not understand the term, I just think it is an inadequate description for the direction the “working” world’s professional attire has taken. Besides, well, it is frumpy...in general. Stepping down from my soapbox...I wanted something that would work for trendy, casual, and dressy gatherings depending on my accessories. 

As you can see on the back left hip, in the picture above, I managed to destroy my casual dress with a leaky ink pen in my luggage. I was just sick when I pulled it from my bag to see a giant streaky mess all over a dress I had not only made, but only worn once. My first line of defense was luke warm water and pump spray stain remover. If anything it made the stain worse. I was determined not to loose this dress so I thought out of the box...the Rit box, that is. 

You will need: 
  • Soiled garment 
  • Rit color remover 
  • Large pot 
  • Hot water 
  • Fabric dye (optional) 

I left myself a couple options. I bought a Rit color remover and a couple colored dyes. I began with the color remover. 

Follow the package directions. I will say this stuff has an obtrusive aroma! I placed the powder packet in hot water on the range beneath the exhaust fan while I stirred, waited for my color to change and watched the ink blot to disappear. 

I had no idea what color would emerge after using the color remover. But I will say I was pleased with the new heathered, light-camel colored dress pictured below. 

If the stain had still been visible or the dress had changed to a completely undesirable color I was armed with a couple selections of dark blues. The dyes can be messy, but all in all pretty easy to use. A few dollars in dye is a much better investment than buying a new dress and really with the change in color you have a new dress anyway. 

A few points to think about when choosing a dye:

  • Will removing the color be enough to correct your fabric? 
  • Will the dye be dark enough to cover your problem area? 
  • Will your fabric take the dye? Check a small swatch first if you are unsure. 
  • Is your fabric heathered or has shade variances...how will this look in a different color? 
  • Does the dye color look good with your skin and hair? 
  • Can you stop the dying process at the point of the color you want?

Friday, August 26, 2011

Make a T-Shirt Dress...You already have a pattern!


Remember at the end of last Friday’s post when I ask you to find an old t-shirt that fits you nicely? Well, here is the post you have been preparing for. 

As you can see I will somehow use an old t-shirt from my closet to create a very trendy, very comfy, and very flattering maxi t-shirt dress. I wanted to post this all summer, but had not had the chance. So, not to waste any more time, let’s get started. 

You will need: 
  • 2 Yards stretch jersey knit fabric 
  • Well fitting t-shirt 
  • Scissors 
  • Sewing machine 
  • Thread 
  • Measuring tape 
First I want to talk about the fabric. The stretch jersey knit is the most common fabric for these t-shirt dresses. If you do not know what I am talking about go to any local women’s store and feel either a t-shirt dress or most any t-shirt. Most of them will be made from something like a 98% polyester and 2% Lycra blend or Rayon or a 97% Cotton and 3% Lycra blend. Unless you have an allergy to or an extreme distaste for a certain fiber the components of the fabric are less important than the weave. You must use a knit fabric or you will be making yourself a short-sleeved clergy robe. 

I used less than two yards because I am shorter than the average fifth-grader. Two yards should be a sufficient length if you are 5’ 11’’ or less. Now I need to address fabric width. Most likely the widest part of your body will be your hips. If so, measure around you hips at their largest circumference and divide that by two. It is possible that your widest point could be your shoulders, but remember that I am not talking about measuring your shoulders from the outer sides of your arms...measure the distance between your shoulder to sleeve seams. Okay, you have established your widest seam to seam measurement now add three inches to that width. Double it. Assume you need 10 plus inches of fabric for the sleeves and this will give you your smallest potential fabric width. For example, 18 inches (seam to seam widest point or 1/2 widest circumference) + 3 inches= 21 multiply x 2= 42 + 12 inches (for sleeves)= 54 inch wide fabric. Make sense? If you cannot find fabric this wide get an extra half yard for the sleeves. 

I chose a striped fabric. Because...it was the fabric I already had, but additionally, stripes are in...as you would know if you have been reading my blog. My small frame cannot carry a full length of heavy stripes nearly as well as a tall person. The stripe width variance helps keep your eye moving even though the stripes are horizontal. Who says you even need to use a striped fabric at all? I love to help people with guides on fashion trends, but ultimately, what is in is what looks and fits you best. You can deck yourself out in the seasons hottest colors, styles, and brands, but if you just cannot wear red high-waisted tapered tribal print cigarette pants, well...don’t! That trend may work for someone else. You are in charge of the end result when you make something yourself. Find a fabric that feels good to you, looks good on you, and still consider colors that are fashionable, but just use a knit! 

Now that you have your fabric let’s really get started. 

Cut the serged edges off of your t-shirt. 

After removing each sleeve mark (F) front or (B) back on your pattern. 

This is what you should be left with after removing all serged edges. This is your pattern. 

I want to mention something before you begin cutting. I liked the fit of this shirt, but it was slightly big on me. Therefore, I really did not leave seam allowances. By not adding seam allowances the dress would be taken in slightly without having to alter my pattern. If this shirt fits you perfectly add 1/2 all the way around your pattern (except the bottom t-shirt hem) to keep the fit the same. 

If your shirt is not long enough to reach your hips widest point you will need to measure down to where your widest point would be located and mark your measurement. To find this measurement, hold the t-shirt front to the shoulder seams of whatever you are wearing. Use a tape measure to measure at what length your widest point will fall. Measure from your pattern to that point on your fabric. From the center measure out half of your widest measurement on either side. 

I used a skirt as a guide. This is not necessary, but helpful. If you do not have a skirt mark the length of the bottom hem of your dress. Say your widest hip measurement was 18” (remember it is halved). Add two inches = 20. The hem line should equal 20 inches across for your dress to hang straight. Use a straight edge and draw slight diagonal line from your widest hip width to the hem. This is where the extra three inches come from: two 1/2" seam allowances and 1 inch added to each side of the hem width.

To ensure your curves on each side of your dress match perfectly cut one half and then fold it in half to cut the other. See below. 

To ensure the front skirt and back skirt are the same lay the cut (dress back) fabric over the t-shirt front, matching the shoulder seams. Fold the top of the dress back down to cut the front dress top. Use the cut piece as your guide for the front skirt. 

To limit confusion with a small piece of soap, mark (on the inside) your (F) front and (B) back, same goes for the sleeves. 

Cut the sleeves. Remember to add seam allowances as needed. 

Pin the right (fabric face) sides together at the shoulders. 

Sew the shoulders together. 

Pin right sides of sleeves to the armseye. I find the best way to do this is to pin the center to the shoulder seams and each end to the shirt body (armpit area) and then manipulate the fabric in between. Sew the sleeves to the bodice. 

You will need to cut an inch strip from your fabric. The length will be determined by measuring the length around the neckline. You will fold the strip in half...hot dog style and sew right sides together with the folded edge facing toward the neck. 

Now that you have sewn a finished edge to the neckline, top stitch onto the bodice side while catching the cut ends of the neckline on the underside. This will keep the neckline laying flat and all of the jagged ends turned under. 

Pin your sides together from the arms eye to the bottom hem. 

Turn 1/4” - 1/2” fabric allowance under and sew to finish the sleeves. Do the same to finish the hem. 

Fold your t-shirt remnants in a bag labeled t-shirt pattern and the size. Now you will have a pattern the next time you want to make a dress or a t-shirt. 

Voila! As comfortable and simple as this cute dress is you might want to make one in every color.